ATW-0512-B Technical Details

wall mounted automatic tap ATW-0048

Wall mounted automatic tap with under-mount sensor eye

Features

Wall-mounted sensor tap
300mm Length
Under-mount sensor eye
Conserve water and Hygienic
Mains/4XAA Alkaline batteries (2-year lifespan)
Hands free infrared activation
Stylish tube design
Solid brass construction

Finish: Chrome-plated

Different ways of controlling temperature

Special Notes:

Temperature control:

This sensor tap is designed to be supplied with pre-mixed water. Consideration should be given to safe hot water delivery and the use of an appropriate temperature reduction device.

A manual blending valve ABV-0012 or a thermostatic mixing valve ATV-0076 will be required if you want this model to regulate hot and cold temperature.

Water pressure:

Water pressure required: 0.5-1 Bar (1 bar or above for best performance)

Reflective surfaces:

Reflective surfaces issue, see image below

Technical Details

Diameter of 'inlet' pipe: G1/2”
Water pressure range: 0.5-1 Bar
Voltage: AC/DC6V
Power consumption: =0.3MW
Sensing distance: 10-30cm
Respond time: 1 Second
Electricity Consumption: 4xAA alkaline batteries (2 years)
Silent Consumption: 0.003W
Environment Temperature: 1-45 C

Dimension:

ATW-0512-B technical details

Reflective interference

It's a known issue that some basin finishes can cause an infra red sensor to become unstable. Please make sure your basin is compatible with this model. Please note that customer's choice of accessories are outside the scope of our company's liability, and we cannot accept any responsibility for any discrepancies, refunds, faults, malfunctions, cost of installations/removal arising from such situation.

Reflective sensor interference