ATW-1204 Technical Details

wall mounted automatic tap ATW-1204

Tubular design sensor wall mounted automatic tap

Features

Stylish Tube design
Wall mounted with 'undermount' sensor eye
Conserve water and Hygienic
DC: Battery powered only (installed)
4XAA Alkaline batteries (2-year lifespan)
Hands free infrared activation
Exquisite and stylish design
Solid outer shell construction

New fixtures: Wall fixing extention & nuts supplied

Different ways of controlling temperature

Special Notes:

Temperature control:

This sensor tap is designed to be supplied with pre-mixed water. Consideration should be given to safe hot water delivery and the use of an appropriate temperature reduction device.

A manual blending valve ABV-0012 or a thermostatic mixing valve ATV-0076 will be required if you want this model to regulate hot and cold temperature.

Water pressure:

Water pressure required: 0.5-1 Bar (1 bar or above for best performance)

Reflective surfaces:

Reflective surfaces issue, see image below

This model doesn't use a control box
No flexible hoses supplied

Technical Details

Diameter of 'inlet' pipe: G1/2”
Diameter of 'inlet' pipe: G1/2”
Water pressure range: 0.5-1 Bar
Voltage: DC6V only
Power consumption: =0.3MW
Sensing distance: 27-31cm
Respond time: 1 Second
Electricity Consumption: 4xAA alkaline batteries (2 years)
Silent Consumption: 0.003W
Environment Temperature: 1-45 C
DC Power ONLY: This sensor tap can only be powered by battery

Dimension:

ATW-1204 technical details

Reflective interference

It's a known issue that some basin finishes can cause an infra red sensor to become unstable. Please make sure your basin is compatible with this model. Please note that customer's choice of accessories are outside the scope of our company's liability, and we cannot accept any responsibility for any discrepancies, refunds, faults, malfunctions, cost of installations/removal arising from such situation.

Reflective sensor interference