Automatic taps save water, which only flows when hands activate the fixture. Excess water use is no longer an issue solely for conservationists, but also for the budget-conscious.
Reduced Cost and Maintenance
Automatic taps save water, which only flows when hands activate the fixture. Excess water use is no longer an issue solely for conservationists, but also for the budget-conscious. People who move slowly often allow taps to flow longer than necessary, or forget to turn them off when they are done washing.
If a washcloth or paper towel settles or block the sink, this can trigger or send a false signal to Autotaps or electronic taps, hence forcing it to dispense water unnecessarily. But should this happen, Autotaps incorporate state-of-the-art technology that shuts off the water valve after 30 seconds avoiding any risk of flooding.
Water conservation can be the main reason to purchase automatic taps and can be seen as an investment, and they pay for themselves in reduced water consumption and maintenance costs. The savings were obvious; there are several push-down taps, self-closing tap but their self-closing valve can take longer to close hence wasting more water!
AUTOTAPS VS Manual Taps
Comparing manual taps and Autotaps after using them for more than 500,000 cycles, Autotaps uses an average of 0.20 gallons of water per use, compared with 0.65 gallons for the manual tap. After taking the costs of energy, sewerage, and maintenance into consideration, Autotaps decreased water and energy usage by 70%. View facts and charts here