General Questions

WHAT DO I GET IN MY SENSOR TAP PACKAGE?
You get the following:

1x Sensor tap
1x Flexible hose (2x flexible hoses supplied with AMA series, ATT Series)
1x Transformer (Built-in inside the control box. If not, it will be supplied separately)
1x Control box (None supplied with AMA/ATT Series)
1x AC Cable (UK 3-pin AC plug is only supplied with new control box design: ACB-0112)
1x Control box back-clip (New design: ACB-0112)
Fitting and Screws
1x Manual

Product Questions

HOW EASY IS IT TO INSTALL A SENSOR TAP?
It’s quite easy. Installing a sensor tap is roughly the same as installing a manual tap. The only difference is, sensor taps usually comes with a control box which needs to be secured underneath the sink. Other connections and installation procedures are very easy to setup. Typical installation procedures can be found here

Technical Questions

HOW DO I INSTALL A THERMOSTATIC VALVE?
It’s very easy to install a thermostatic valve. A typical installation procedure can be found here.

Print