ATX-8203 Technical Details

Tall and Elegant 'Goose' neck design sensor tap

Product Details:

Image

Tall and Elegant 'Goose' neck design sensor tap
Height: 380mm
Integrated spout sensor-eye
Intelligent 'auto-adjust' sensor distance 
Single supply
Power: Mains/4XAA Alkaline batteries (up-to 2yr lifespan)
Hands free infrared activation
Fixed/360 degree swivel-neck design
Solid-brass outer shell construction
Finish: Chrome-plated
1x Flexible supply hose performance)

Note:
This is a single-supply sensor tap, to regulate/mix hot and cold water together, a thermostatic mixer or a blending valve will be required.

Control box: Diameter of 'inlet' pipe: G1/2”
Control box: Diameter of 'outlet' pipe: G1/2”
Water pressure range: 0.75 (Min) - 7 Bar (Max)
Voltage: DC6V or AC220V-240V (6V Output)
Power consumption: =0.3mW
Sensing distance: 6-24cm
Respond time: 1 Second
Battery Consumption (DC): 4xAA alkaline batteries (up-to 2yr lifespan depending on level of usage)
Silent Consumption: 0.003mW
Environment Temperature: 1-45 C
Flow Rate: 6L/Per minute
Pipe Threading: British Standard Whitworth (BSW) 
Noise Class: 1
Finish: Chrome-plated
Voltage: DC6V or AC220V-240V (6V Output)

Image
NOT APPLICABLE

1x Sensor Tap
1x Control Box ***with 3-Pin plug (*battery compartment inside)
1x Flexible G1/2" *600mm Connection Hose
1x Transformer (*inside the control box)
Fittings and Screws

OPTION 1: ATV-9004C

 

ATV-9004C Control box ATV-9004C
This thermostat can be connected directly to the control box using its 1/2" female outlet connector. This method is usually the quickest way to setup installation.




 

OPTION 2: ATV-9004B

 
ATV-9004B Control box connection ATV-9004C
This thermostat has a 'wall-mounting' bracket that can be mounted on the wall and linked to the control box 'inlet' via a connecting pipe or a flexible hose (not supplied).

TIP:
You can run up-to three (3) sensor taps (maximum) with one thermostat. Water pressure of both hot and cold supplies must be at least 3 bar.




 

OPTION 3: ABV-0012

 
ABV-0112 and Control box connection ABV-0012
This is a manual blending valve, adjustable by hand only. There's no thermostatic mixing element inside. Any desired temperature can only be achieved 'manually' by turning the knob clockwise or anti-clockwise by hand.




 
NOT APPLICABLE
NO VIDEO AVAILABLE

SENSOR TAP FEATURES

Some basic features of Autotaps™ sensor-activated taps

Design

Tall 'Goose' neck design sensor tap

Sensor Type

Integrated 'fibre-optic' spout sensor

Water Pressure

Water pressure required: 0.75-7 Bar (1 bar or above for best performance)

Hands-free Activation

Hands free infrared sensor activation

Finish Type

Chrome-plated
(Standard Finish)

Water Supply

Single supply

Power Supply

AC & DC Options | Mains/4XAA Alkaline batteries

Drilling a Hole?

32mm (3.2cm)

Product Overview

ATX-8203 Sensor Automatic Tap

Image

ATX-8203 | ATX Series Range

Tall and Elegant 'Goose' neck design sensor tap

Design

Tall fixed-neck design

Sensor

Integrated 'fibre-optic' spout sensor

Water Supply

Single supply

Material

Solid brass outer-shell construction

Power Supply

Mains/4XAA Alkaline Batteries (up-to 2yr lifespan)

Water Pressure

0.75-7 Bar (1 bar or above for best performance)

Print