Pillar design 2-in-1 'deck mounted' sensor tap with manual and automatic activation.
Product Details:
- Image
- Product Features
- Technical Information
- Dimension
- Functions
- Contents
- Temperature Control Options
- Remote Control
- Video
Pillar design 2-in-1 sensor tap
Manual flow rate adjustment
Manual and automatic water activation
Manual temperature control lever
Hygienic and upto 70% water conservation
Independent battery holder: 4XAA Alkaline batteries
Hands free and reliable infrared activation technology
Exquisite and stylish pillar design
Solid brass construction
2x flexible supply hoses
Water pressure required: 0.75-7 Bar (1 bar or above for best performance)
Note:
This is a double-supply 'hot and cold' sensor tap. No need for a thermostatic mixer or a blending valve. Temperature is controlled via the temperature lever on the side.
Manual flow rate adjustment
Manual and automatic water activation
Manual temperature control lever
Hygienic and upto 70% water conservation
Independent battery holder: 4XAA Alkaline batteries
Hands free and reliable infrared activation technology
Exquisite and stylish pillar design
Solid brass construction
2x flexible supply hoses
Water pressure required: 0.75-7 Bar (1 bar or above for best performance)
Note:
This is a double-supply 'hot and cold' sensor tap. No need for a thermostatic mixer or a blending valve. Temperature is controlled via the temperature lever on the side.
Diameter of 'inlet' flexible hoses: G1/2”
Water pressure range: 0.7 (Min) - 8 Bar (Max)
Voltage: AC/DC6V
Power consumption: =0.3MW
Sensing distance: 10-31cm
Respond time: 1 Second
Electricity Consumption: 4xAA alkaline batteries (2 years lifespan depending on level of usage)
Silent Consumption: 0.003W
Environment Temperature: 1-45 C
Flow Rate: 5L/Per minute
Pipe Threading: British Standard Whitworth (BSW)
1x Sensor Tap
1x Battery Box
1x Trasformer
2x Flexible G1/2" *600mm Connection Hoses
Fittings and Screws
NOT APPLICABLE
NOT APPLICABLE
NO VIDEO AVAILABLE
SENSOR TAP FEATURES
Some basic features of Autotaps™ sensor-activated taps
Design
Curve-neck design
Sensor Type
Infrared Sensor
Water Pressure
Water pressure required: 0.75-7 Bar (1 bar or above for best performance)
Hands-free Activation
Hands free infrared sensor activation
Finish Type
Chrome-plated
(Standard Finish)
(Standard Finish)
Water Supply
Double 'hot and cold' supply
Power Supply
AC & DC Options | Mains/4XAA Alkaline batteries
Drilling a Hole?
30mm (3cm)
Product Overview
ATT-0116 | Sensor electronic tap with manual and automatic activation
Design
Pillar design 2-in-1 sensor tap
Sensor
Infrared Sensor with Touch Function
Water Supply
Double 'hot and cold' supply
Flow
Manual flow rate adjustment
Power Supply
Mains/4XAA Alkaline Batteries (up-to 2yr lifespan)
Water Pressure
0.75-7 Bar (1 bar or above for best performance)
