Manufacturer of automatic sensor taps, electronic taps, electronic tap, sensor tap, electronic sensor, infra red sensor technology, sensor kits, control boxes infrared urinal flushers, sensor showers, and automatic tap accessories. UK's leading manufacturer and supplier of automatic sanitary ware sensor touchless taps and glass basins | Water saving technology is our specialty

ASD-1001MB | AUTOMATIC SOAP AND WATER DISPENSER DECK MOUNTED INSTALLATION

Deck-mounted automatic soap dispenser for commercial and domestic applications

matte black soap and water dispenser

ASD-1001MB

Deck-mounted automatic soap and water dispenser

Features:
2-in-1 automatic water and soap dispenser
Deck-mounted installation
Hands-free 'dual sensor' activation
Solid-brass outer shell construction
Exquisite and stylish arced-neck design
Easy to install
Quick refill soap bottle
Voltage: DC6V or AC220V-240V (6V Output)
Finish: Chrome-plated
Height: 185mm
Under-mount (Below Deck) Reservoir 
Exquisite and stylish 'tubular' design
Quick Refill
Solid Construction

Finish: Matte Black
Type: Deck-mounted

Power Option
Batteries and Mains (Both power options supplied)

Power Consumption
Active mode≤3.5W
Static mode ≤ 0.8mW

Drilling a hole?
35mm

Water Pressure
0.75bar (Minimum) - 1bar (Recommended).

Buy Product

Lorem Ipsum

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc quam urna, dignissim nec auctor in, mattis vitae leo. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Lorem Ipsum

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc quam urna, dignissim nec auctor in, mattis vitae leo. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Display 5.2"
Camera 12MP
RAM 4GB
OS iOS

Incredible product

John Smith, 20 Jan 2018

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec augue nunc, pretium at augue at, convallis pellentesque ipsum. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Incredible product

John Smith, 20 Jan 2018

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec augue nunc, pretium at augue at, convallis pellentesque ipsum. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Incredible product

John Smith, 20 Jan 2018

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec augue nunc, pretium at augue at, convallis pellentesque ipsum. Lorem ipsum dolor sit amet, consectetur adipiscing elit.


Technical Details:
Power supply: 
AC: 100V-240V ; 50/60HzDC: 6V (4 x AA alkaline batteries)

Power Consumption:
Active mode≤3.5W
Static mode ≤ 0.8m

Sensor range:
10-15 cm (Sensing for soap)
10-25 cm (Sensing for water)

Self-close override time
30 seconds (Automatic faucet 

Inlet/outlet connection:
1/2"

Water Pressure:
0.05-0.8 Mp

Water temperature
5-45

Soap dispense volume
4 Settings

Soap bottle capacity
1800ml

Viscosity of liquid soap
1~3000 cp (mPa·s)

Ambient temperature
1-55℃

Ambient humidity
Max. 90RH





Not applicable



1x Water/Soap Tap
1x Soap box
1x Control box with pump
1x Power Pack
Fittings and Screws




Not applicable

IRC-613 REMOTE CONTROL


FLUSH/RUN Water: Flow Time Increase
When this button is pressed once, it will increase water flush/flow time by ‘5 seconds’. Each key press represents 5 seconds ‘flow time’ increment.

HOW TO: 
With remote control facing/pointing towards the sensor, press once, a solid LED light comes on first and briefly followed by 3 LED light flashes. Each key press increases water flow time by 5s. For example, press 1 time =5s, press 2 times= 10s, 3 times= 15s etc.

NOTE: 
Each key press must be registered by sensor module first before setting another parameter. For example, if you want the tap to run for 10 seconds, press this key once and let it register (which equals 5s) and press it again the second time to increase it from 5s to 10s and so on.
FLUSH/RUN Water: Flow Time Decrease
When this button is pressed once, it will decrease water flush/flow time by ‘5 seconds’. Each key press represents 5 seconds ‘flow time’ decrement.

HOW TO: 
With remote control facing/pointing towards the sensor, press once, LED light flashes 3 times. Each key press will decreases water flow time by 5s. For example, press 1 time =-5s, press 2 times= -10s, 3 times= -15s etc.

NOTE: 
Each key press must be registered by sensor module first before setting another parameter. For example, if you want the flow time to be decreased by 10 seconds, press this key once and let it register (which equals -5s) and press it again the second time to decrease it from 10s to 5s and so on.
Increase Sensor Distance
This button will increase the sensor distance by/between 2-5cm.

HOW TO: 
With remote control facing/pointing towards the sensor, press once, a solid LED light comes on first and briefly followed by 3 LED light flashes. Each key press increases sensor proximity zone, and represents 2-5cm increment.

*Sensor distance range scope is around/between 7cm-35cm
Decrease Sensor Distance
This button will decrease the sensor proximity distance by/between 2-5cm.

HOW TO: 
With remote control facing/pointing towards the sensor, press once, a solid LED light comes on first and briefly followed by 2 LED light flashes. Each key press increases sensor proximity zone, and represents 2-5cm increment.

*Sensor distance range scope is around/between 7cm-35cm
Auto Search
This button allows the 'automatic' settings of the sensor proximity sensor range. 

HOW TO: 
With remote control facing/pointing towards the sensor, press once, a solid LED light comes on first and briefly followed by 5 LED light flashes. During these flashes, the sensor will auto-calibrate itself and adjust its infrared distance settings in accordance with environment. 

This button can also be used to set the sensor distance manually.
 
For example, once this button is pressed, place hand/object at desired position/distance where you want sensor range to end and it will automatically calculate the distance from sensor module to hand/object.
Standby
This button will put the sensor on standby or 'inactive' mode. This is particularly useful if the tap needs cleaning or simply trying to put the sensor tap 'out of action' during holiday period. When this mode is active, the sensor will not respond to any interaction with it until it's switched ON again. 

HOW TO: 
With remote control facing/pointing towards the sensor, press once, LED light comes on and stays on for 2-3 seconds and then goes off, standby mode is now active.

To disable, press once, LED light comes on and stays on for 2-3 seconds ‘twice’ and then goes off. Standby mode is now disabled.

Related Products: ASD Dual Series

brushed nickel soap and water dispenser
2-IN-1 AUTOMATIC SENSOR WATER AND SOAP DISPENSER

ASD-1001BN

chrome soap and water sensor dispenser
2-IN-1 AUTOMATIC SENSOR WATER AND SOAP DISPENSER

ASD-1001C

brushed nickel water and soap dispenser
2-IN-1 AUTOMATIC SENSOR WATER AND SOAP DISPENSER

ASD-1001BN